Our Services

ANSB EXPERTISE & SERVICES

AERONAUTICAL STUDIES

Aeronautical Study is a study to identify aeronautical issue and to select a possible solution that is acceptable without degrading safety. This become necessary for the civil aviation authority approval which involve airspace usage and air traffic management including for building /structure & UAS ATF approval (especially close to airport).

This study is very crucial even at the early stage of development (land accusation) in order to ensure the investment spent can give a maximum return.

AIRSPACE/AERODROME DESIGN

Aerodrome is a defined area or land (including any buildings, installations and equipment) intended to be used either wholly or in part for the arrival, departure and surface movement of aircraft. This service applied to identify define airspace such as for airport, helipad, waterway and UAS Geo-zone for publication.

FLIGHT PROCEDURES DESIGN & FEASIBILITY STUDIES

As an AFPDO, we are certified to design the flight procedures for any type of aircraft, either manned or unmanned, fixed-wing or rotor, or even a rocket, subject to the aeronautical data provided by the operator. Start from filing the flight plan (FPL) until chocks-on and from the air to ground, including the ATC Procedures.

AERONAUTICAL INFORMATION SERVICE (AIS) & PUBLICATION

AIS office is where all the aeronautical information is published and disseminate to all airmen. Through this service, ANSB will assist the industries to prepare the draft for CAAM publication, including charts, NOTAM, AIC and AIP Supplement or Amendment.

DEVELOPMENT OF CONCEPT OF OPERATION (CONOPS) & STANDARD OPERATING PROCEDURE (SOP)

Through our pool of expertise, from civil aviation SME to the academician and other related industries, we shall be able to assist the client on the development and execution of complex CONOPS and SOP, especially on the following area:

i. Air Traffic Management Operation Plan (ATMOP)

ATMOP is very crucial in order to identify the needs and requirement to be adopted into the identified airspace structure for a safe and orderly flow of air traffic, these include the preparation of ATC procedures, system architectural (communication, navigation, surveillance and air traffic management), airspace sectorization, training requirements and business continuity plan.

ii. Operational Readiness, Activation And Transition (ORAT)

Operational Readiness, Activation and Transition (ORAT) is a proven integrated approach methodology in managing a transition of a new or a substantially upgraded facility, project, or service from its construction stage to the active live operations. The preparation of ORAT plan is very important in order to bridge the gap between the construction and operation phases for a critical infrastructure such as airport and air traffic control centre for safe and seamless transition.

TRAINING AND SYLLABUS

i. Introduction of Airspace Management and Air Traffic Service in Malaysia

This training is to give an overview on airspace management and air traffic service (in relation to Malaysia Flight Information Region - FIR). It is valuable for any organization or group of people who are involve in airspace usage and operation including UAS operator, high-rise building developer & crane operator (close to airport).

ii. Aerodrome Flight Information Service (AFIS)

This training is for the personal of any organization (private or government) or individual (i.e privately owner aerodrome heliport) for the provision of AFIS within their Flight Information Zone (FIZ) or Aerodrome Heliport as to be specified by the Malaysian ATS Authority.

ONE-STOP-CENTER (OCS) CONSULTANT SERVICE

This service to assist the client with technical knowledge and expertise throughout the approval process with various authorities for the following application:

i. Building/Structure Approval – CAAM OCL 0.1.

This one-stop-center consultant service is to facilitate the client to gain the maximum allowable height based on complete ASR & mitigation plan which will involve coordination with various organization. The optimized utilization of the airspace utilization will not only benefit the developer but also the local authority and consumer.

ii. UAS Authorization To Fly (ATF) - CAAM/BOP/UAS/ATF/01-02:

This OSC consultant service is to facilitate the client with complete necessary requirements by the authorities especially CAAM, including the ASR, ATC Coordination Procedures and Special UAS Project. Client also will be provided with DaaS and SaaS advisory services.

OTHER FACILITATION CONSULTANT SERVICE (FCS)

We also provide the following service:

  • Certification of Airport/Airstrip/Helipad
  • Establishment of Design Organizational Approval (DOA), Production Organizational Approval (POA), Remote Pilot Training Organization (RPTO), Approved Training Organization (ATO) - Air Traffic Control (ATC) & Flight Training Organization (FTO) and Approved Flight Procedure Design Organization (AFPDO).